- Metric Locking Tailpiece Studs
- Made in the USA
- Steel body and cap
- 1/8” Allen wrench (not included) to adjust post height
- Mounting studs with metric threaded M8 x 1.25 threads
- 7/8" (22.4mm) thread length
- Fits tailpiece with a minimum ears thickness of .250" (6.4mm)
- Set of 2
Instructions:
To lock the tailpiece to the studs simply tighten the slotted cap. To adjust the tailpiece height, first, loosen the slotted cap slightly and insert a 1/8” Allen wrench (not included) through the top. Retighten the slotted cap once you reach the desired tailpiece height.
MM or CM to Fractions of Inches
-
How to fix your tilting stoptail bridge
Not only does this fix the leaning problem, it also fixes the "bridge is too tall and action is too high" problem for asian-spec guitars. If you buy ANYTHING with that stop bar tailpiece, you ARE going to need this-this one is for Epiphones/Chibsons, The other one is for Gibsons. Just go ahead and get it, because you are going to have to have it. It also stops the weird "chirping/buzzing" effect that most of these guitars have, because it fixes the string break angle issues from the string saddles.
