- Digital Nut Slotting Gauge
- Machined brass base with slight arch to match most fingerboard radii
- Accurate to .0005"(0.01mm)
- Switchable between inch/mm
- Available for Guitar and Bass
- Base also available seperately
The digital nut slotting gauge allow for accurate measurement of string height at the first fret that can then be used to adjust the slot height. An easy way to record slot height when setting up multiple guitars for accurate and repeatable results.
Base also sold separately so you swap the gauge for guitar and bass setups.
MM or CM to Fractions of Inches
-
Great Tool
Just line it up over the first fret, zero it and press the string down on both sides of tool. Very accurate. Only drawbacks are that it is difficult to zero it out without moving it and the display is a little difficult to see.
-
Digital Nut Slotting Gauge
It's well built and designed. Nice solid base which helps get a stable reading at the first fret. A point deducted though because the weight of the plunger is heavy enough to cause inaccurate readings by about .002-.003" on the lighter strings. In this case the action is actually higher than what the gauge reports, which isn't all bad as you definitely don't want to cut your nut slot too low here. While the measurement of the fret to string distance after the plunger is set may be withing the .0005"(0.01mm) accuracy advertised, the actual distance is not because the weight of the plunger pushes down on the string before a measurement is taken. But as long as you know this, it's still a useful tool.
-
Nut slot depth gauge
This works very well!!
-
Digital nut slotting gage
The design of base is excellent
