Guitar and Bass tuning machines are sold by the side of the headstock they are mounted when viewing from the front. Left or Right side is not the same as left or right handed. Please remember this when placing your order.
- GOTOH SG381-01 Tuning Machines
- Sold in pre-configured sets - 3Lx3R, 4Lx2R
- Standard non-locking string posts
- Large metal knobs
- 16:1 tuning ratio
- 45 degree offset mounting hole (the mounting hole is located 45 degrees from the vertical center of the string post)
- ROCK-SOLID posts prevent the rocking of string post
- LUBRI-PLATE lubrication for smooth action and longer life
- Includes bushings and mounting screws
We are selling the SG381-01 in 2 pre-configured sets for your convenience. Also sold individually to make your own custom set.
MM or CM to Fractions of Inches
-
GOTOH SG 381-01
These tuning machines fit my Ovation CE44P-SM-G perfectly. It took me about 45 - 50 minutes to remove the old strings, unscrew the old tuners, install the new ones and put a new set of SIT strings on! Tuning the guitar and keeping it in tune is significantly better. They are so much smoother than the standard tuners from Ovation. They fit without drilling new holes for the small screws on the headstock. A wonderful upgrade for $55.00. I would highly recommend these. And the customer service via email was quick and accurate. Thanks again Kenny!
