Guitar and Bass tuning machines are sold by the side of the headstock they are mounted when viewing from the front. Left or Right side is not the same as left or right-handed. Please remember this when placing your order.
- Custom Laser Etched Logo(or text) Locking Tuning Machines
- Locking thumbwheel with custom logo or text of your design
- Sold in pre-configured sets..3Lx3R, 4Lx2R, 6L, 6R, 7L, 7R
- These are very high-quality OEM spec tuning machines...don't confuse these with similar-looking low-quality copies
- Small metal knobs
- 19:1 tuning ratio
- 45-degree offset mounting hole (the mounting hole is located 45 degrees from the vertical center of the string post)
- Two posts heights available Short -19mm and Long - 20.5mm
- 3Lx3R and 4Lx2R are only available as (AL) All Long posts
- **Inline sets are available 2 different strings post-height configurations:
- (SS) Standard Stagger; 6L/6R - 3 Short/3 Long posts; 7L/7R - 3 Short/4 Long posts (for headstock thickness 9/16"(15.1mm) or less)
- (AL) All Long; 6L/6R - 6 Long posts; 7L/7R - 7 Long posts
- Solid posts prevent the rocking of the string post
- Includes bushings and mounting screws
The logo or text is permanently laser marked on the rear thumbwheel. The laser marking will appear frosted white on chrome and gold plating. On the black and black chrome, it will look be a gold(or tan) color.
The logo should be a single-color image (no grayscale image) in the highest resolution possible. For the text, please provide the font name and text in the special instruction area. An image of the text can also be uploaded. We will send you a layout proof for your approval before shipping. Please look for the email within 24 hours of your order.