Guitar and Bass tuning machines are sold by the side of the headstock they are mounted when viewing from the front. Left or Right side is not the same as left or right handed. Please remember this when placing your order.
- GOTOH SGL510Z-A01-MGT Locking Tuning Machines
- Sold in pre-configured sets - 3Lx3R, 4Lx2R
- Large metal knobs
- 1:21 tuning ratio
- 45 degree offset mounting hole (the mounting hole is located 45 degrees from the vertical center of the string post)
- ROCK-SOLID posts prevent the rocking of string post
- LUBRI-PLATE lubrication for smooth action and longer life
- NEW MAGNUM-TRAD Traditional style locking tuner with thumbwheel
- Includes bushings and mounting screws
The SG510 MG-T is GOTOH's flagship super tuning machine with its 1:21 gear, precision fitted gears and high-quality finish. The MG-T uses an intuitive rear mounted thumbwheel locking mechanism for fast string changes.
We are selling the SGL510Z-A01-MGT in 2 pre-configured sets for your convenience. The 3Lx3R and 4Lx2R include all long(20mm) string posts.
Also sold individually to make your own custom set configurations.
Locking tuning machines will use a shorter post than non-locking tuning machines. The string posts are on average about 1/16" (2-3mm) shorter so you will have the proper downward pressure at the nut and increased tuning stability.
MM or CM to Fractions of Inches
-
GOTOH SGL510Z-A01 Locking Tuning Machine Midsize-Large Knobs - Pre-Configured
This is the best tuner by far that I'm using... the ratio is 1:21 Gotoh for me and Philadelphialuthiertools gets for me the best stuff.
-
Gotoh locking tuners
Great tuners! Very accurate tuning.
