- Tuning Machine Conversion Bushings
- Nickel plated
- Wider lip to help hide old bushing marks - approx. 9/16" (14 mm) diameter
- 13/32" o.d. 1/4" i.d. for use in 10 mm headstock holes
- Set of 6
- Allparts TK 0901-001
MM or CM to Fractions of Inches
-
conversion bushings
Fit and dimensions are all spot on, so mechanical function is perfect. More than that, plating and all edges are exceptionally well executed, so the look and feel are really pretty amazing compared to cheesier replacement parts spit out as cheaply as possible. If you're working on a good guitar, get good parts. These are terrific.
-
Inserts
Installation tool was very nice.
-
Headstock tuner bushings
These are the best bushings for my Les Paul jr. They replace the ugly big washer with nut and come closer to the original bushings as possible.
-
Bushing for Gotoh SD 90 Magnum Locks
The bushing hole in my SG 61 Re-issue were 1 to 2 mm to big meaning that the bushings would fall out when the guitar was flipped over for string change. I just wrapped some plumber's tape several times around each post and finger pressed them in and worked like a gem. I have not noticed any negative effects from this action. The bushings look great and matches the Gotoh tuning posts very nicely and with no slop. I am very please with this product.
