- Mini Humbucker pickup cover 50mm
- Nickel Silver Base Material
- 50mm E to e measured center to center spacing
- Pole screw hole diameter is .15” (3.8mm)
- Overall dimensions are 2.67" x 1.1" x .55" (67.95mm x 28mm x 14mm)
- Please verify all measurement before placing your order.
- Available in Black Chrome, Chrome, Gold, Nickel, Pearl Chrome, and Raw (non-Plated)
- Qty 1 pickup cover
Our mini-humbucker pickup covers are slightly longer than vintage mini or firebird pickup covers. Vintage pickup covers measure approximately 2.587” x 1.1”. These covers are about 2.675” x 1.1”. That makes these cover about 3/32” longer than vintage and will not fit the original deluxe pickup rings. Please check your measurements before ordering these as replacement pickups covers.
Color Guide (not all finishes are available)
Gold - The exact color of gold can vary from batch to batch. Is not uncommon to find gold plating that ranges from an orange to a light yellow. Our gold pickup covers will be in the middle of the tint range.
Black - Typically has oil or silicone applied to get the smooth black finish found on black plated parts. When not oiled, it will appear to have a matte finish.
Chrome - Chrome can be identified as having a slightly blue tint when compared to nickel plating. Chrome is a very durable finish and is the most common color used for hardware except for old vintage instruments.
Nickel (plating) - Nickel when compared to chrome will have a slight yellowish tint. A softer finish than chrome and show age early with heavy use.
Black Chrome (similar to Cosmo Black, Black Nickel, Smoked Black Nickel, Ruthenium, etc) - This is a very interesting color. It is a very hard finish to take a picture of because of the way it reflects light. It can sometimes appear lighter or darker depending on the surroundings. Compared to Black, it is not nearly as dark and very glossy(reflective). Used on a lot of superstrat hardware from companies like Ibanez.
Pearl Chrome - Pearl Chrome is another black finish but is very light compared to Black Chrome. It is almost like a slightly tinted black chrome.
Raw (No Plating) - This is truly an unfinished pickup cover. It is a pickup cover without any processing done so it can show light scuffing, scratching, and oil from the manufacturing process. The look of raw covers can easily be changed by sanding to create a brushed look or light polishing to make them appear aged. Many will use also use them as is.
1 Review Hide Reviews Show Reviews
Excellent product as always. Philadelphia Luthier has always sold me the best of the best and honored returns/exchanges when needed (only once!).