- 7-String Humbucker Pickup Cover
- 61.2mm pole spacing
- Nickel Silver base material
- 61.2mm center to center pole spacing. Please verify this measurement before ordering.
- Overall dimensions are 3 1/8" x 1 7/16" x 5/8" (79.1mm x 36.8mm x 16.3mm)
- Available in Black, Black Chrome, Chrome, Gold, Nickel, and Raw (non-plated) plating
- Qty 1 pickup cover
Color Guide (not all finishes are available)
Gold - The exact color of gold can vary from batch to batch. It is not uncommon to find gold plating that ranges from an orange to a light yellow. Our gold pickup covers will be in the middle of the tint range.
Black - Typically, oil or silicone is applied to get the smooth black finish found on black-plated parts. When not oiled, it will appear to have a matte finish.
Chrome - Chrome can be identified as having a slightly blue tint when compared to nickel plating. Chrome is a very durable finish and is the most common color used for hardware, except for old vintage instruments.
Nickel (plating) - Nickel, when compared to chrome, will have a slight yellowish tint. A softer finish than chrome and shows age early with heavy use.
Black Chrome (similar to Cosmo Black, Black Nickel, Smoked Black Nickel, Ruthenium, etc) - This is a very interesting color. It is a tough finish to take a picture of because of the way it reflects light. It can sometimes appear lighter or darker depending on the surroundings. Compared to Black, it is not nearly as dark and is very glossy(reflective). Used on a lot of superstrat hardware from companies like Ibanez.
Raw (No Plating) - This is truly an unfinished pickup cover. It is a pickup cover without any processing done, so it can show light scuffing, scratching, and oil from the manufacturing process. The look of raw covers can easily be changed by sanding to create a brushed look or light polishing to make them appear aged. Many will also use them as is.
MM or CM to Fractions of Inches
-
Absolute perfection! Best pickup covers and fast shipping.
Where I live, it’s almost impossible to find decent guitar parts. Since my guitar has Asian import specs, everything I bought previously required routing out the body wood... To make matters worse, most local luthiers do really sloppy work—messy wiring and cold solder joints everywhere. Because of that, I ended up learning to do almost everything myself: setups, soldering, nut replacements, and wax potting (basically everything except fret leveling, refretting, and heavy woodworking). These pickup covers are top tier and look absolutely gorgeous! The pole piece spacing is 100% accurate, the finish quality is super clean, and they fit amazingly well. Plus, I love that this shop offers direct international shipping. Thank you so much for stocking these products!!!!!
