49.2mm (1 15/16") Humbuck Pickup Cover

7 Reviews Write a Review
$6.49 - $13.49
SKU:
PC-1879
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added
    • Guitar Humbucker Pickup Cover
    • Nickel Silver Base Material
    • 49.2mm E to E measured center to center pole spacing.  Please verify this measurement before ordering. 
    • Overall dimensions are 2.75" x 1.5" x .635" (69.7mm x 38.1mm x 15.9mm)
    • Available in Black Chrome, Chrome, Gold, Nickel, Pearl Chrome, and Raw (non-Plated)
    • Qty 1 pickup cover

    Color Guide (not all finishes are available)

    Gold - The exact color of gold can vary from batch to batch. Is not uncommon to find gold plating that ranges from an orange to a light yellow. Our gold pickup covers will be in the middle of the tint range.

    Black - Typically has oil or silicone applied to get the smooth black finish found on black plated parts. When not oiled, it will appear to have a matte finish. 

    Chrome - Chrome can be identified as having a slightly blue tint when compared to nickel plating. Chrome is a very durable finish and is the most common color used for hardware except for old vintage instruments.

    Nickel (plating) - Nickel when compared to chrome will have a slight yellowish tint. A softer finish than chrome and show age early with heavy use.

    Black Chrome (similar to Cosmo Black, Black Nickel, Smoked Black Nickel, Ruthenium, etc) - This is a very interesting color. It is a very hard finish to take a picture of because of the way it reflects light. It can sometimes appear lighter or darker depending on the surroundings. Compared to Black, it is not nearly as dark and very glossy(reflective). Used on a lot of superstrat hardware from companies like Ibanez. 

    Pearl Chrome - Pearl Chrome is another black finish but is very light compared to Black Chrome. It is almost like a slightly tinted black chrome.

    Raw (No Plating) - This is truly an unfinished pickup cover. It is a pickup cover without any processing done so it can show light scuffing, scratching, and oil from the manufacturing process. The look of raw covers can easily be changed by sanding to create a brushed look or light polishing to make them appear aged. Many will use also use them as is. 

MM or CM to Fractions of Inches

Your browser does not support the canvas element.
Fill MM, CM, decimal inch or fractional inch to convert

  • 5
    49.2mm Humbucker Cover

    Posted by Jamie Cartwright on Jan 19, 2024

    These are good quality covers. Correct corner radius, they take solder well and the finishes are strong. The 49.2mm is a perfect fit for the Epiphone ProBucker neck.

  • 5
    Black chrome covers

    Posted by Dave on Nov 16, 2023

    Perfect fit, very nice plating and amazing delivery. Overall, a very satisfying experience.

  • 5
    Gibson pickups

    Posted by Mark on Jun 9, 2023

    Fit my 61 burstbuckers easy install

  • 3
    These are nice but…..

    Posted by Brett Holborn on Apr 12, 2023

    These are nice pick up covers but the issue I had was they were slightly flared out around the bottom. I didn’t really pay attention until I had them all mounted and soldered on and it wouldn’t fit it the pick up cavity of my guitar. I had to unmount them and bend the edge back all the way around the cover.

  • 3
    Holes are just a little too small

    Posted by Dallas on Feb 22, 2023

    The holes are just slightly too small for modern Gibson polepieces, had to replace with PAF-size ones to make it fit.

  • 5
    Humbuck Pickup Cover

    Posted by Robert on Feb 9, 2022

    Great Product well made half the price of everything else I searched for. Will be using your site more often. Thanks

  • 5
    Nice cover

    Posted by Eric on Jan 4, 2022

    I used this spacing for both traditional Gibson and Seymour Duncan humbuckers and it fits well. The inside of the cover is very flat and I haven't had problems with squealing.

Competitive

Low Prices

No Hassle Return Policy

Send to you within 24 Hours

Best Quality Products

100% Guarantee