- Tele Neck Flat Mounting Ring
- Steel
- Available in Black, Black Chrome, Chrome, Gold, and Nickel
- Dimensions are 3.94" (100 mm) x 1.28" (32.5 mm) x .12" (3 mm) thick
- Inside dimensions are 2.63" (66.8 mm) x .63" (15.9 mm)
- Outer mounting hole spacing measured center to center is 3.56" (90.5 mm)
- Pickup mounting holes are 2.85" (72.5 mm)
- ***Please check dimensions carefully before ordering***
- MOUNTING SCREWS ARE NOT INCLUDED - uses #4 x 1/2" oval head screws (standard Fender size pickguard screws)
- Qty 1 pickup mounting ring
Color Guide (not all finishes are available)
Gold - The exact color of gold can vary from batch to batch. Is not uncommon to find gold plating that ranges from an orange to a light yellow. Our gold pickup covers will be in the middle of the tint range.
Black - Typically has oil or silicone applied to get the smooth black finish found on black plated parts. When not oiled, it will appear to have a matte finish.
Chrome - Chrome can be identified as having a slightly blue tint when compared to nickel plating. Chrome is a very durable finish and is the most common color used for hardware except for old vintage instruments.
Nickel (plating) - Nickel when compared to chrome will have a slight yellowish tint. A softer finish than chrome and show age early with heavy use.
Black Chrome (similar to Cosmo Black, Black Nickel, Smoked Black Nickel, Ruthenium, etc) - This is a very interesting color. It is a very hard finish to take a picture of because of the way it reflects light. It can sometimes appear lighter or darker depending on the surroundings. Compared to Black, it is not nearly as dark and very glossy(reflective). Used on a lot of superstrat hardware from companies like Ibanez.
