Flat metal humbucker pickup mounting ring

4 Reviews Write a Review
$10.74 - $12.48
SKU:
MR-1894
Adding to cart… The item has been added
  • Metal humbucker mounting ring
  • Steel material except for Raw (Nickel Silver)
  • These are not plastic
  • Dimensions are 3 5/8" (92mm) x 1 13/16" (46.3mm) x 1/16" (2.1mm) thick
  • Inside dimensions are 2 3/4" (70mm) x 1 17/32" (39mm)
  • Outer mounting hole spacing measured center to center is 3 1/4" (83mm), Short side 1 15/32" (37mm)
  • ***Please check dimensions before ordering***
  • MOUNTING SCREWS ARE NOT INCLUDED - uses #3 x 3/8" oval head screws (Gibson pickguard/backplate screws)
  • Available in Black Chrome, Pearl Chrome, Chrome, Gold, Nickel, and Raw (non-plated Nickel Silver)
  • Qty 1 pickup mounting ring

Color Guide (not all finishes are available)

Gold - The exact color of gold can vary from batch to batch. Is not uncommon to find gold plating that ranges from an orange to a light yellow. Our gold pickup covers will be in the middle of the tint range.

Black - Typically has oil or silicone applied to get the smooth black finish found on black plated parts. When not oiled, it will appear to have a matte finish. 

Chrome - Chrome can be identified as having a slightly blue tint when compared to nickel plating. Chrome is a very durable finish and is the most common color used for hardware except for old vintage instruments.

Nickel (plating) - Nickel when compared to chrome will have a slight yellowish tint. A softer finish than chrome and show age early with heavy use.

Black Chrome (similar to Cosmo Black, Black Nickel, Smoked Black Nickel, Ruthenium, etc) - This is a very interesting color. It is a very hard finish to take a picture of because of the way it reflects light. It can sometimes appear lighter or darker depending on the surroundings. Compared to Black, it is not nearly as dark and very glossy(reflective). Used on a lot of superstrat hardware from companies like Ibanez. 

Pearl Chrome - Pearl Chrome is another black finish but is very light compared to Black Chrome. It is almost like a slightly tinted black chrome.

Raw (No Plating) - This is truly an unfinished pickup cover. It is a pickup cover without any processing done so it can show light scuffing, scratching, and oil from the manufacturing process. The look of raw covers can easily be changed by sanding to create a brushed look or light polishing to make them appear aged. Many will use also use them as is. 

MM or CM to Fractions of Inches

Your browser does not support the canvas element.
Fill MM, CM, decimal inch or fractional inch to convert

  • 5
    FLAT METAL HUMBUCKER PICKUP MOUNTING RING

    Posted by mike on Oct 15, 2023

    Solid!

  • 5
    Flat Humbucker rings

    Posted by Pete on Sep 7, 2023

    Excellent quality and finish, have tried several others and these are the only ones that I will buy.

  • 5
    Humbucker trim rings

    Posted by Pete on Aug 24, 2023

    These rings are very well made with an excellent finish. Clean holes and no sharp edges.

  • 5
    High Quality and Classy

    Posted by Adam on Jul 2, 2023

    This is a well-machined, high quality humbucker mounting ring. I got it in black chrome for a black superstrat I was restoring. The black chrome looks fantastic, although it isn’t as black as the black chrome Schaller use on their tremelos, machine heads etc. The black chrome ranges from brownish-grey to deep black, depending on the angle it is viewed at. I am very pleased with it though, and it looks amazing with a DiMarzio humbucker with black metal cover, black pole pieces and black stainless steel mounting screws.

Competitive

Low Prices

No Hassle Return Policy

Send to you within 24 Hours

Best Quality Products

100% Guarantee